Description
SS Vertical Color is a low sheen acrylic product, richly pigmented and designed for use over new and old concrete surfaces. It may be used on concrete decks, floors and walls. It can be used as a base color or an antique color.
Additional information
| Weight | 10 lbs |
|---|
Technical Information
Surface Preparation: Surface must be clean and free of oil, wax, grease, dirt and sanding dust. Remove all dust with a dust cloth. Do not apply if substrate temperature is below 40 degrees F. Application: Apply with a paint roller, nylon brush or airless sprayer. All surfaces to be coated must be clean and free of containments. If more sheen is desired, SS Eposeal 38 may be used to clear coat the surface. Antique: Allow the first SS Vertical Color application to dry. Apply the second coat of a contrasting color with an airless sprayer and wipe off before drying leaving pigment in the low areas to create a natural appearance.
Use warm water and soap. Clean tools with soapy water immediately after use. Dispose of containers in accordance with local and federal regulations.
Dried, cured SS Vertical Color can be removed by chemical means such as SS Strip-A-Lot or by mechanical means.
• Protect from freezing and high heat.
• Flash Point >250 degrees F.
• Coverage rates depend upon many conditions including application method, surface porosity, applicator, etc.
• Use impervious gloves for prolonged or repeated contact. Eye irritation may occur. Wear protective goggles. Wash thoroughly after handling.
• Use in well-ventilated area. Inhalation of vapors may cause headaches, nausea, eye and lung irritation as well as narcosis.
• Keep away from children.
• Dispose of the product in accordance with all applicable state and local laws.
• the Statements made within this technical data sheet, SDS, product labels, etc., are guidelines only. the end user should always perform test and produ-ct evaluations prior to application to ensure suitability for particular uses.
