SKU: KT-CC755 Category:



Fresno WeightWeigh down your fresnos and floats to prevent the
possibility of skipping as it glides across the concrete slab.
This 5 pound iron weight has 1/2 in. groove down the center
that fits over the bar that runs down the center of fresno for
a snug fit without movement. The channel creates a center fit
that will evenly distribute the weight on the front and back
side of the tool. Flip it over to fit within the center channel
on a Big “D” Bull Float or Laminated canvas-resin Bull Float.
Using a minimum of two weights for left/right balance is
recommended for best results. Proudly made in the USA.

  • Weigh down to prevent floats and fresnos from skipping
  • Center channel fits snuggly around square bar on
    fresnos to resist movement
  • Flip upside down and it fits in the center channel of
    Kraft Tool's Big “D”
  • Use one on each end of the tool for proper balance

Additional information

Weight 5 lbs