2×4 can be attached with double stick tape, clamps or screws. enFORMS can be attached with finish nails to keep from floating. Decking should be cut at a 45 angle to strengthen edge. Made of rubber so it easily wraps corners without mitering. enFORM can be free formed on plywood or melamine to make virtually any shape table or countertop.
| Weight | 6 lbs |
|---|---|
| Unit | CASE, EACH |
When used in a free form countertops with curves and a unique shapes the enFORM will save time in setting an edge.
2 x 4 can be attached with double stick tape, clamps or screws. enFORMS can be attached with finish nails to keep from floating. Decking should be cut at a 45° angle to strengthen edge. Made of rubber so it easily wraps corners without mitering. enFORM can be free formed on plywood or melamine to make virtually any shape table or countertop.
Use warm soapy water with a brush before material hardens.
The statements made within this technical data sheet, SDS, product labels, etc are guidelines only. The end user should always perform tests and product evaluations prior to application to ensure suitability for particular uses.
