Technical Information

• Easy to use, just add water
• Used to create depth and texture
• Easily accepts stains and dyes
• Works great to repair surface flaws

SURFACE PREPARATION: Insure that the surface is clean, dry and free of grease, oil, and sealers prior to applying enMAGIC to a hardened concrete countertop surface. MIXING: Mix enMAGIC with 18 oz to 24 oz of clean water depending upon the desired consistency. Mix by hand or with small drill in a one gallon bucket. APPLICATION: Work with application techniques to gain confidence and familiarity. Dampen the substrate with water, pour the enMAGIC in a long thin line. Spread with a margin trowel, pool trowel, Magic Trowel or squeegee. Apply as thin as possible. COLORING: Create samples to determine the rate of enCOLOR addition or to determine acid stain dilution rates. LIMITATIONS: enMAGIC is a thin build product, avoid thickness of greater than 1/8”. Do heavy patching and filling of deep holes prior to applying enMAGIC. CAUTION: Contact with water may cause uncured enMAGIC to delaminate. Please note: It is always recommended to test the product in a small, inconspicuous area (on the same concrete substrate) for desired results prior to application. Coverage rates may vary for all coatings and substrates depending on porosity, density, texture etc.

Warm, soapy water before material hardens. Dispose of containers in accordance with local and federal regulations.

enMAGIC has a shelf life of one year in it’s original, sealed, unopened container.

• Keep out of reach of children.
• Use appropriate personal safety protection gear such as particle masks, eye protection and gloves.
• The statements made within this technical data sheet, SDS, product labels, etc are guidelines only. The end user should always perform tests and product evaluations prior to application to ensure suitability for particular uses.