492 LIQUID COLOR FOR BAGS 58 OZ.

SKU: ENCOLOR-492 Category:

Clear

Description

enCOLOR colors are pre-dispersed iron oxide pigments solids in an aqueous baseliquid. enCOLOR provides an easy integral color solution for pre-cast or cast in place applications.

Choose the appropriate color from the enCOLOR chart. Stir the contents of the enCOLOR bucket thoroughly to insure complete blending of the pigments. After determining the amount of pigment for each bag of enCOUNTER® mix, draw the proper amount into the syringe and squirt into the measured amount of water. The color chart is a guideline which may be adjusted up or down to adjust the shade of color.

 

Additional information

Weight 10 lbs
Unit

CASE, EACH

Technical Information

Self-dosing
Consistent batch color
Easy to use
enCOLOR allows the countertop builder a greater opportunity to create a top with a unique appearance with color being consistent throughout. enCOLOR gives the contractor 9 different pallet colors to create rather than just white or grey.

Choose the appropriate color from the enCOLOR chart. Stir the contents of the enCOLOR bucket thoroughly to insure complete blending of the pigments. After determining the amount of pigment for each bag of enCOUNTER mix, draw the proper amount into the syringe and squirt into the measured amount of water. The color chart is a guideline which may be adjusted up or down to adjust the shade of color . Color consistency for multiple bag projects is best achieved with mechanical mixing of four bags of enCOUNTER in a barrel mixer. Combine enough color with the proper amount of water for all four bags in the mixer and then slowly add the four bags of mix. Conduct tests whenever possible to application techniques prior to application on the larger project.

enCOLOR has a shelf life of 6 months.

• enCOLOR should be kept from freezing even though the actual pigment will remain stable in freeze-thaw conditions. However, every freeze-thaw cycle does cause some separation, which will require additional remixing before the enCOLOR can be used.
• Keep out of reach of children.
• Over-finishing should be avoided to protect against “burning” the surface.
• DO NOT “hard” trowel a colored surface. This can leave dark blotches and uneven coloring on the surface of the slab.
• Keep the lid on tight.
• Stir before each use.
• The statements made within this technical data sheet, SDS, product labels, etc are guidelines only. The end user should always perform tests and product evaluations prior to application to ensure suitability for particular uses.
• A sample is always recommended when dealing with colors.

Reviews

There are no reviews yet.

Be the first to review “492 LIQUID COLOR FOR BAGS 58 OZ.”

Your email address will not be published. Required fields are marked *

You may also like…